產品資料

Vacuum Oven

如果您對該產品感興趣的話,可以
產品名稱: Vacuum Oven
產品型號: OVEN-V
產品展商: Lab Companion
產品文檔: 無相關文檔

簡單介紹

Vacuum Oven


Vacuum Oven  的詳細介紹

Fundamental equipment for electronics production

These units has been exclusively designed for vacuum heat treatment such as defoaming, deaerating, hardening or drying, essential processes in the production of electronic components.

Eco model
Thanks to improved air-tightness and sealing capacity, the chamber achieves 20 to 40% savings in energy consumption. (Compared to previous model)
Program operation
Control programs possible by combining temperature and 5 pressure operation modes.
Variety of options
More than 20 options are available to meet customers' needs.
Specifications

Model Temperature & pressure range Inside / Outside dimensions (mm)
OVEN-V-91 +40 to +200°C (+104 to +392°F) / 933 to 1×102Pa W450×H450×D450 / W902×H1392×D780
OVEN-V-216 W600×H600×D600 / W1052×H1532×D930
OVEN-V-512 W800×H800×D800 / W1252×H1772×D1130

Uncompromising energy-saving mechanisms
Max. 40% of energy savings can be achieved through various structure improvements: superior insulation materials' use, enhanced door lock, etc. for better insulation and air-tightness.
Flexible programming of the operation mode
A wide variety of programs can be designed by combining constant and programmed temperature operations with one of the 5 pressure operation modes (Automated operation, continuous operation, open to atmosphere, gas exchange, and ventilation operation) Up to 40 patterns can be set, with 99 steps per pattern programmable.
Double-layered interior construction
The interior of the vacuum chamber is equipped of a double structure. A heater surrounding the internal chamber allows great uniformity performance by minimizing heat loss.
Revamp high-speed processing controller
User-friendly configuration allows easy operation of the different commands. Bright touch panel with speedy information processing.
Register test patterns
Up to 40 patterns for program operation and 3 patterns for constant operation can be registered.
Broad range of options
Over 20 options available to best suit your application.
Expert Mode (Option)
Control of the pressure increase / decrease can be achieved in 6 stages; an operation is memorized when performed the first time and can be called up to accurately repeat the process.
Viewing window (Option)
Slightly curved viewing window, eliminating any exterior reflection.



產品留言
標題
聯系人
聯繫電話
內容
驗證碼
點擊換一張
注:1.可以使用快速鍵Alt+S或Ctrl+Enter發送資訊!
2.如有必要,請您留下您的詳細聯繫方式!

粵公網安備 44190002003872號